Your Home's First Heating System – Your Guide To Choosing The Perfect Option

Introduction

Building a home is not a simple task. There are many things to take into consideration, a lot of important decisions to make and heating is one of them. The choice of your heating depends on many variables and you need to make the right decision. The purpose of this article is to show you what options you might have and how to decide which one is the best for you. We shall lay out some of the most popular heating systems and explain each one in detail. This will help you decide which system fits your needs and offers you the best heating option.

Heating systems for your home

There are various heating solutions you can choose, each with its own perks and disadvantages. If you are going to install your first heating mechanism, you need to do it right. Here are some of the most popular and efficient ways to keep your house warm during the winter.

Hydronic panel heating system

This is one of the most popular systems on the market to heat up your home. This system is not only efficient, but it’s also easy to install and maintain. It uses hot water in order to spread heat evenly through every room. It's a clean, silent mechanism that works well for both smaller and larger homes. Although you would need more panels for a larger home, it would still pay off in the long run.

How it works

There are four main elements:

  • Boiler – Connected to a water supply it holds the water and heats it. Boilers usually run on gas or coal, depending on their type. Some boilers are designed to use gas, coal, and electricity as an energy source. The type of boiler you choose will depend on the energy source that is available at your home. For example, not all houses have access to town gas, and therefore cannot use gas-powered boilers. 
  • Pump – Draws the water from the boiler and pumps it through the tubes. It works on electricity, so if you don't have an alternate energy source, your heating won't work in case of a power loss.
  • Tubes – They distribute hot water through the house. Tubes lead the water into and out of the panels. They are usually made from copper because of its thermophilic properties.
  • Panels – Panels spread the heat that they absorb from the hot water running through them. Each panel has a valve that controls water intake, which reduces or increases the temperature in your room.

Be prepared to drill a few holes through your walls for the tubes to go through and to install your panels. But if you need a heating system that will keep you consistently warm through those harsh winters, then this is the one for you.

Split system heating

This is a great choice if you have moderate winters. It's not a system you want to use if you experience freezing temperatures during the colder months. This heating method works on electricity and you can use it to heat up one room, or all rooms individually. This means that you can set different temperatures in each room.

How it works

There are two main components of this installation:

  • Outdoor unit – Uses heaters and a fan to drive hot air through to the tube all the way to the indoor unit.
  • Indoor unit – Works on electricity and heats up the room to the temperature that you choose. The indoor unit could be mounted on the upper side of your wall or the lower side, depending on the model. Some can even be placed on the ceiling.

Some might find this form of heating too loud but there are some very quiet split system heating solutions. The best part of this method is that it keeps the temperature at the same level and only activates when the temperature drops.

You will need to install an indoor unit in every room you want to heat. This means that you’ll need to find an appropriate place for the unit throughout your home, ensuring that it’s properly positioned to allow for proper heat distribution. You will also need to have a power source nearby.

Ducted system heating

This form of heating demands a lot of work. It provides heat through the entire house and doesn't need any panels or special equipment, but it does require you to build a network of pipes to direct the heat to each room.

Ducted heating is also known as central heating, as it relies on a single heat source for the entire home. Although it requires a lot of work, it is a silent system, and an excellent solution for cold winters as it supplies the heat through the entire house.

Key elements of this system are:

Central heating unit – It usually works on gas that heats the air in tubes. A fan is driving the air through the insulated ducts into each room.
Insulated ducts – They are spread through the walls of the home, leading the hot air to and through the vents.

Vents – Open and close depending on the room temperature. They let the hot air in the room when the thermostat detects a drop in temperature. They are usually placed discretely on the wall or ceiling.

Thermostat – Detects the room temperature and sends a signal to vents.

There are some major disadvantages to ducted systems. Most notably, the system spreads a lot of dust and microbes throughout the house when it’s running. Some homeowners dislike the dry air the system produces, which has made it a less popular system in recent years.

Conclusion

All these heating systems offer you differnt ways to keep your entire home warm during the winter. Which one you decide on depends on your location and the size of your home. There's also the question of your budget, and how much you're willing to pay. In our opinion, it's better to invest a little more and save money in the long run. In addition, you need to decide how much time are you willing to spend on installation, as some systems require more time.

Which heating system do you prefer for your home? Let us know in the comments, we would love to know.

Posted on 23/07/2019